Kimberly™ & Katydid™ Venting Kits

Unique Venting System Saves $$$

Due to the exceptionally complete combustion inside a Kimberly™ and Katydid™ gasifier wood stoves, Kimberly™ and Katydid™ are the only two EPA Certified wood stoves which have been approved to vent with pellet stove pipe using a Class-A passthrough from the ceiling through the roof. 

This unique venting system typically saves up to $1200 to $1500 in venting costs, making your TOTAL installation costs similar to a $2000 wood stove. All other wood stoves must vent with Class-A pipe for the entire length of the chimney, which is engineered to withstand the higher flue temperatures that other wood stoves produce from hot unburned gases exiting the chimney as smoke.

Using gasifier technology, Kimberly™ and Katydid™ burn these gases as fuel during secondary combustion, producing more heat from less wood, while leaving behind less ash and producing a nearly smokeless and stealth burn. 

Your family will love you, because you’ll spend less time cutting wood for your Kimberly™ or Katydid™ wood stove and have more time for them, and your neighbors will love you for choosing a Kimberly™ or a Katydid™ wood stove because of your nearly smokeless chimney.

Important: Follow only the Kimberly™ Owner’s Manual for installation instructions. Do not follow installation instructions which may be included with your pellet pipe custom venting kit. Remove orange silicone gaskets from pellet pipe for use with a Kimberly™ or Katydid™ wood stove.

Free Heating & Design Consultation

Contact us for your FREE heating & design consultation! Your custom venting kit for Katydid™ or Kimberly™ will be drop-shipped to your door via UPS. Residential applications typically require a “Class-A” rated pass-through from the ceiling through the roof, which can add an additional $500.00 to your estimated installation costs.

Commonly Required Parts For Katydid™ Wood Stove Installations.

Part Number Part Description
Part  #  712704KT Cathedral Ceiling Support Box
Part  #  72080004TRVB 4-Inch Appliance Adaptor
Part  #  71410004 Flashing & Storm Collar 0/6
Part  #  71410105 Flashing & Storm Collar 6/12
Part  #  71040104 4-Inch Bio Vent Cap
Part  #  71010604B 6-Inch Straight Length Pipe
Part  #  710112048B 12-Inch Straight Length Pipe
Part  #  71012404B 24-Inch Straight Length Pipe
Part  #  71012404BINS 24-Inch Insulated Straight Length Pipe
Part  #  71013604B 36-Inch Straight Length Pipe
Part  #  71013604BINS 36-Inch Insulated Straight Length Pipe
Part  #  71024504B 45-Degree Elbow
Part  #  71029004B 90-Degree Elbow
Part  #  98500415 4×15 SSLT Flex C Kit
Part  #  98500425 4×25 SSLT Flex C Kit
Part #  71094404 Pipe Flex Adaptor/Increaser
Part  #  71092604 to 6/8" Class A Pipe Adaptor/Increaser
Part  #  71151004 Wall Thimble
Part  #  660004 Storm Collar

Commonly Required Parts For Kimberly™ Wood Stove Installations.

Part Number Part Description
Part  #  712703KT Cathedral Ceiling Support Box
Part  #  UF72050303STB Starter-T & End Cap
Part  #  71410004 Flashing & Storm Collar 0/6
Part  #  71410104 Flashing & Storm Collar 6/12
Part  #  71040103 3-Inch Bio Vent Cap
Part  #  71010603B 6-Inch Straight Length Pipe
Part  #  71011203B 12-Inch Straight Length Pipe
Part  #  71012403B 24-Inch Straight Length Pipe
Part  #  71012403BINS 24-Inch Insulated Straight Length Pipe
Part  #  7103603B 36-Inch Straight Length Pipe
Part  #  7103603BINS 36-Inch Insulated Straight Length Pipe
Part  #  71024503B 45-Degree Elbow
Part  #  71029003B 90-Degree Elbow
Part  #  98500315 3×15 Foot SS LT Flex C Kit
Part  #  98500325 3×25 Foot SS LT Flex C Kit
Part #  71094303 Pipe Flex Adaptor/Increaser
Part  #  71092603 to 6/8" Class A Pipe Adaptor/Increaser
Part  #  71151003 Wall Thimble
Part  #  660004 Storm Collar